To Cancel a Posted Message
1. Press Menu.
2. Select Posted Msg.
The current message appears on line 1 of the screen.
3. Select Cancel.
The message disappears.
4. Press Home to exit Posted Message.
Send/Remove Message
The Send/Remove Message feature is available to operators
only. Press
Send/Remove Message
on your console to turn
the message light on or off for any phone in your system. If
you use the Send/Remove Message feature while on a call, an
inside caller will hear touch-tones but an outside caller will not.
For co-workers with display phones, the Send/Remove
Message feature turns on message lights and also delivers
the message: ATT OPERATOR (or your name, if programmed,
and your extension and the date and time you left the
message). For example: ATT RENEE 20:26 08/02 X14.
If another operator has turned a co-worker’s message light on
with Leave Message, using Send/Remove Message feature
will turn that co-worker’s message light off. To make sure that
you don’t accidentally turn off a co-worker’s message light
that should be on, use the Message Status button on the
DSS to check the status of your co-worker’s message light
before you use the Send/Remove Message feature. For more
information, see "To Send Messages (Consoles with DSS)."
4-29
To Next Page
Loading...
