Speed Dialing
To dial a Speed Dial number (from a touch-tone phone only):
1.
2.
Lift the handset.
You hear the intercom dial tone.
Press [ # ] plus the 2-digit Speed Dial code (20 to 29).
The system automatically selects an outside line and dials the Speed Dial
number.
Using Calling Features
You cannot use calling features
from a rotary telephone.
You can use two calling features with a standard touch-tone telephone by press-
ing [
# ] plus a 2-digit code. (The [ # ] replaces the [ Feature ] button on a PARTNER
phone.) Table 5-1 shows the calling features you can use.
Table 5-1 Using Calling Features with Standard Phones
Feature How to Use It
Last Number Redial
Press [
#
] [
0
] [
5
]
Recall Press [
#
] [
0
] [
3
]
To use a calling feature on a standard telephone:
If you are not already on a call . . .
1.
Lift the handset.
You hear the intercom dial tone.
2.
Dial [ # ] plus the 2-digit dial code.
If you are on an outside call . . .
1.
Rapidly press and release the switchhook.
You hear an intercom dial tone and the call is put on hold.
2.
Press [ # ] plus the 2-digit dial code.
The system automatically returns you to the outside line you were on and then
activates the feature.
For a complete description of what calling features do, and when to use them,
see p. 4-11.
Using Standard Telephones
5-5
To Next Page
Loading...
