104
Caller ID
Caller ID operation
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 101).
2. When the desired entry appears, press # (pound key) repeatedly to show
different dialing options.
3. When the number is in correct format, press SAVE . The telephone base
displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right.
Press /DELETE or BACKSP to erase a digit.
Press and hold /DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
5. Press NEXT .
6. Press CID, DIR, /RECORD, or /DELETE to highlight one of the
following types:
Home
Cell
Work
Other
7. Press NEXT . The telephone base displays EDIT NAME.
8. Use the dialing keys (page 90) to edit the name.
Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right.
Press /DELETE or BACKSP to erase a character.
Press and hold /DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press #
(pound key).
9. Press SAVE to confirm. The telephone base shows Saved.
NOTES:
If the caller’s name you received from the telephone service provider is all in capital letters,
the first letter of every word remains a capital letter, while other letters become lower case.
However, the next letter after the prefix “Mac”, “Mc”, “D’”, “C’” or “O’”, is kept as a capital letter.
For example, the “D” in “MacDonald” is kept as a capital letter. Another exception is that “VAN
DER” will be changed to “Van der”.
If the telephone number from the caller ID information has already been saved in the directory
under a different name, the new name will overwrite the old one.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
