AT&T TL86103 - Installation of AT&T Softphone Call Manager on Computer; Audio Settings

12
Getting started
Connecting your telephone base to computer
Installation ofof AT&T Softphone Call Manager on computer
To install AT&T Softphone Call Manager:
1. Put the CD-ROM that comes with the package into your computer. Open
My computer, and then double click to open the disk drive.
-OR-
Visit www.telephones.att.com/downloads to download the software. Unzip
the file after download.
2. Double click the installation file to begin the InstallShield Wizard.
If any security warning window pops up, tick the option check box to
authorize the installation of the software. Click Run.
3. Select the language to be displayed during the installation and in the
program. Click OK to continue.
4. Click Next>. Read the license agreement, and then accept the terms by
pressing the upper check box. Press Next> to continue.
5. The default installation path is:
“C:\Program Files\AT&T\AT&T Softphone Call Manager v3”.
Click the Browse... button to change the path, if necessary. Click Next>.
6. Select the program to connect to the software. ClickSelect the program to connect to the software. Click Next>.
7. ClickClick Install.
8. When the installation is complete, pressWhen the installation is complete, press Finish to exit the installation program.
If you want to launch the AT&T Softphone Call Manager after installation,
tick the option check box before pressing Finish.
Audio Settings
After you have installed the AT&T Softphone Call Manager, check to make sure
the audio setting is properly configured in your Skype and/or Microsoft Lync.
Audio settings in Skype:
1. Launch the Skype program.
2. Click Tools, and then Options.
3. Click Audio settings.
4. Make sure AT&T USB Audio is selected under the speakers and microphone
settings.
Audio settings in Microsoft Lync:
1. Launch the Microsoft Lync program.
2. Click Options, and then Audio device.
3. Make sure AT&T USB Audio is selected under the Audio device setting.
IMPORTANT
Periodically check for software updates. Go to the ABOUT tab under the Settings panel in the
AT&T Softphone Call Manager, and then click Check Update. For more details, refer to the
Software updates section in the Installation and Operation Guide, available in the
CD-ROM which comes with the package.
•
•