AT&T TL86103 - Ringer Volume

35
Telephone settings
Cordless handset and telephone base settings
Ringer volume
You can select the ringer volume for incoming calls on all lines.
Using a cordless handset:
Press MENU in idle mode to enter the main menu.
Press CID or DIR to highlight Ringers, and then
press SELECT .
Press SELECT to choose Ringer volume.
Press CID or DIR to highlight All lines, Line 1, Line 2,
Cell A, Cell B, or PC call, and then press SELECT .
Press CID or DIR to sample each ringer volume.
Press SELECT to save. Your hear a confirmation tone and
the screen returns to the previous menu.
Using the telephone base:
Press MENU in idle mode to enter the main menu.
Press CID, DIR, /RECORD, or /DELETE to
highlight Ringers, and then press SELECT .
Press SELECT to choose Ringer volume.
Press CID, DIR, /RECORD, or /DELETE to
highlight All lines, Line 1, Line 2, CELL A, Cell B, or
PC call, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
sample each ringer volume.
Press SELECT to save. Your hear a confirmation tone
and the screen returns to the previous menu.
-OR-
Press q/VOLUME/p on the telephone base to set the ringer volume while
the telephone base is in idle mode.
Press SELECT to confirm and you hear a confirmation tone.
NOTES:
Changing the handset ringer volume does not affect the base ringer volume, and vice versa.
The ringer volume level also determines the ringer levels of intercom calls (page 75).
If the ringer volume on line 1 and/or line 2 is set to off, the screen will display L1) Ringer off
and/or L2) Ringer off.
If the ringer volume on cell A line, cell B line, or both cell lines are set to off, the screen will
display CL) A Ringer off, CL) B Ringer off, or CL) Ringers off, respectively.
If the ringer volume on PC line is set to off, the screen will display the PC ringer off icon
P
C
.
If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly
display Caller ID won’t be announced.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
•
•
•
•
•
•
RINGERS
p
q
SELECT
BACK
RINGERS
Ringer volume
Ringer tone
p
q
SELECT
BACK
RINGER VOLUME
BACK S
BACK
SET
RINGERS
Ringer volume
Ringer tone
RINGERS
All lines
Line 1
Line 2
BACK
SELECT
BACK
SELECT