AT&T TL86103 - Ringer Tone

36
Telephone settings
Cordless handset and telephone base settings
Ringer tone
You can select the ringer tones for incoming landline and cell calls.
Using a cordless handset:
Press MENU in idle mode to enter the main menu.
Press CID or DIR to highlight Ringers, and then
press SELECT .
Press CID or DIR to highlight Ringer tone, and then
press SELECT .
Press CID or DIR to highlight All lines, Line 1, Line 2,
Cell A, Cell B, or PC call, and then press SELECT .
Press CID or DIR to sample each ringer tone. A sample
of each ringer tone plays as you scroll through the choices.
Press SELECT to save. You hear a confirmation tone and
the screen returns to the previous menu.
Using the telephone base:
Press MENU in idle mode to enter the main menu.
Press CID, DIR, /RECORD, or /DELETE to
highlight Ringers, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
highlight Ringer tone, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
highlight All lines, Line 1, Line 2, CELL A, Cell B,
or PC call, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to sample each ringer tone.
A sample of each ringer tone plays as you scroll through the choices.
Press SELECT to save. You hear a confirmation tone and the screen returns
to the previous menu.
NOTE: When the ringer is off, you will not hear ringer tone samples and ringer tone during an
incoming call.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
RINGER TONE
All lines
Line 1
Line 2
RINGER TONE
1
2
3
BACK
SELECT
BACK
SELECT
RINGER TONE
All lines
Line 1
Line 2
p
q
SELECT
RINGER TONE
1
2
32
p
q
SELECT
BACK
BACK