AT&T TL86103 - Connect Your Telephone Base to Computer; Compatibility

11
Getting started
Connect your telephone base to computer
Your new AT&T TL86103 allows you to make and receive softphone calls
by connecting the telephone base to your computer by using the USB cable
provided in the package. You can manage softphone Voice over IP (VoIP) calls
through Skype
TM
or Microsoft Lync
®
, landline calls, or cell calls by using the AT&T
Softphone Call Manager. You can also use the voice command feature to make
calls (see page 60) after you have installed the AT&T Softphone Call Manager.
For more details about the software, refer to the English or French Installation
and Operation Guide, available in the CD-ROM which comes with the package.
Compatibility
The AT&T Softphone Call Manager works with:
Operating systems Software programs and versions
Microsoft
®
Windows XP
®
,
Windows Vista
®
, Windows 7,
Windows 8
Skype
TM
5.0 or above, Windows Media Player
®
10 or above, Microsoft Outlook
®
2003 or
above, Microsoft Lync
®
2010/2013, iTunes
®
10
or above, Landline calls controllers
To connect the telephone base to your computer:
Plug the USB cable into your computer, as shown below. Wait for your
computer to recognize your AT&T TL86103.
•
The Skype name is a trademark of Skype.
Microsoft
®
, Microsoft Lync
®
, Microsoft Outlook
®
, Windows
®,
Windows XP
®,
Windows Vista
®
and
Windows Media Player
®
are registered trademarks of Microsoft Corporation.
iTunes
®
is a registered trademark of Apple, Inc.
All other trademarks are the properties of their respective owners.
Plug the small end of the USB cable
into the micro USB port on the right
side of the telephone base.
Plug the large end of the USB
cable into a USB port on your
computer.