18
Getting started
Belt clip & optional cordless handset
To attach the belt clip:
Snap the belt clip into
the slots on both sides
of the cordless handset,
as shown in the figure.
To remove the belt clip:
Gently lift either of the
belt clip tabs, shown in
the figure, outwards to
remove the belt clip from
the handset.
For handsfree telephone conversations, you can use any industry standard
2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm
headset. To purchase a headset, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Plug a 2.5 mm headset (not
included) into the jack on the
side of handset (beneath the
small plastic cover).
Lift the plastic
cover here.
Side of handset
To Next Page
Loading...
