AT&T TL86103 - Temporary Tone Dialing; Hold

67
Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
Press TONE on the cordless handset or telephone base.
Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
The telephone automatically returns to pulse dialing after you end the call.
Hold
You can place a call on hold. You hear an alert tone at the telephone base if
you have not taken the call off of hold after 14 minutes. You hear another alert
tone at the telephone base 30 seconds later. At 15 minutes on hold, the call on
hold automatically disconnects.
To place a call on line 1 or line 2 on hold:
Press HOLD on a cordless handset or the telephone base. L1) On hold
and/or L2) On hold appears on the cordless handset and telephone base.
, , or flashes on the screens of the handset and the telephone
base.
To resume a call on line 1 or line 2 on hold:
Press LINE 1/FLASH or LINE 2/FLASH on a cordless handset, or press 1 LINE
or 2 LINE on the telephone base.
To place a cell call on hold:
Press HOLD on cordless handset or the telephone base. CL) A On hold,
CL) B On hold, or CL) A&B On hold appears on the handset and telephone
base. A , B, or A B flashes on the screens of the cordless handset and
telephone base.
To resume a cell call on hold:
Press A CELL or B CELL on the cordless handset, or press CELL A or
CELL B on the telephone base.
1.
2.
3.
•
•
•
•