AT&T TL86103 - Call Transfer Using Intercom

78
Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system device
or the telephone base. You can also share an outside call with another system
device or the telephone base.
To transfer or share an outside call using intercom:
Using a cordless handset:
When on an outside call, press OPTION .
Press SELECT to choose Intercom. The call is automatically put on hold.
If you have one handset and no other registered devices, the outside
call is put on hold and your handset displays Calling base. The
telephone base rings and displays HANDSET is calling.
If you have cordless headset(s)/speakerphone(s) or more than one
handset, your handset displays INTERCOM TO: Use the dialing keys to
enter a specific handset number (1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, # for a single cordless headset/speakerphone,
and # followed by 1 or 2 for cordless headset/speakerphone 1 or
cordless headset/speakerphone 2, respectively), or presspress CID or DIR
to select a destination device, and then press SELECT .
The call is automatically put on hold. Your handset screen displays
Calling HANDSET X, Calling BASE. The destination device rings and displays
HANDSET X is calling.
3. To answer the intercom call on the other device, press ANSWER ,
LINE 1/FLASH, LINE 2/FLASH, /SPEAKERSPEAKER, A CELL, B CELL, or any
dialing key (0-9 or TONE ) on the destination handset, or press 1 LINE,
2 LINE, or SPEAKERSPEAKER on the telephone base. Both handsets and the
telephone base show Intercom and the outside call is still on hold.
4. From this intercom call, you have the following options:
You can transfer the call. Press OPTION , and then
press SELECT to select Transfer on the calling handset.
Your screen shows Call transferred. The other handset
automatically connects to the outside call.
You can let the other device join you on the outside
call in a 3-way conversation. Press OPTION , and then
CID or DIR to highlight Share call, and press SELECT .
You can end the intercom call and continue the outside call with your
cordless handset. Press OFF/CANCEL, END, LINE 1/FLASH, LINE 2/FLASH,
A CELL, or B CELL on your cordless handset. The ended intercom
call party hears four beeps, and the destination device screen shows
Intercom ended.
NOTES:
If you want to cancel an intercom call and reconnect to the outside call before the destination
handset answers, press OFF/CANCEL or END on the originating handset.
If the called device does not answer within 100 seconds, or it is in use, on a call, or out of
range, the initiating device shows No answer. Try again. and returns to the outside call.
1.
2.
•
•
•
•
•
•
•
Transfer
Share call
BACK
SELECT