AT&T TL86103 - Telephone Operation

52
Telephone operation
Make, answer, or end a call on line 1 or line 2
The TL86103 telephone base can be used to make or answer calls on up to
two individual landlines (pages 9 and 10).
Using a cordless handset:
To make a call on line 1 or line 2:
Press LINE 1/FLASH, LINE 2/FLASH, or /SPEAKER, and then enter the
telephone number.
To predial a call on line 1 or line 2:
Enter the telephone number, and then press LINE 1/FLASH, LINE 2/FLASH,
or /SPEAKER.
To answer a call on line 1 or line 2:
Press LINE 1/FLASH, LINE 2/FLASH, /SPEAKER, or any dialing key (0-9 or
TONE )
.
To end a call on line 1 or line 2:
Pressress OFF/CANCEL, or place the cordless handset into the charger.
Using the telephone base:
To make a call on line 1 or line 2:
Press 1 LINE, 2 LINE, or SPEAKER , and then enter the telephone number.
-OR-
Lift the corded handset, and then enter the telephone number.
To predial a call on line 1 or line 2:
Enter the telephone number, and then press 1 LINE, 2 LINE, or SPEAKER .
To answer a call on line 1 or line 2:
Press 1 LINE, 2 LINE, SPEAKER , or any dialing key (0-9 or TONE ).
-OR-
Lift the corded handset.
To end a call on line 1 or line 2:
Press the corresponding line button, 1 LINE or 2 LINE.
-OR-
Press SPEAKER or return the corded handset to the telephone base.
NOTES:
The screen shows the elapsed time as you talk (in hours, minutes and seconds).
When predialing (preview numbers before dialing), press MUTE/DELETE on the cordless
handset or /DELETE on the telephone base to backspace and delete; press and hold
REDIAL/PAUSE on the cordless handset or REDIAL/PAUSE on the telephone base to insert a
dialing pause (a p appears).
You cannot answer a call on line 1 or line 2 using your connected cell phone.
You can also make or answer a call on line 1 or line 2 using AT&T Softphone Call Manager. Please
refer to the Installation and Operation Guide in the CD-ROM which comes with the package.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Telephone operation