AT&T TL86103 - Page 48

42
Telephone settings
Cordless handset and telephone base settings
Using a the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Settings, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Voicemail #, and then press SELECT .
4. Press CID, DIR, /RECORD, or /DELETE to
highlight Line 1 or Line 2, and then press SELECT .
5. Use the dialing keys to enter the voicemail access
number provided by your telephone service provider
(up to 30 digits) when prompted.
Press CID or /REPEAT to move the cursor
to the left. Press DIR or /SKIP to move the
cursor to the right.
Press /DELETE or BACKSP to erase a digit.
Press and hold /DELETE to erase all digits.
Press and hold REDIAL/PAUSE on the telephone base to enter a dialing
pause (a p appears).
6. Press SAVE to confirm. There is a confirmation tone and the screen displays
Voicemail # saved, and then returns to the previous menu.
•
•
•
•
p
q
SELECT
BACK
SETTINGS
Voicemail #
Clear voicemail
Key tone
p
q
SELECT
BACK
VOICEMAIL #
Line 1
Line 2
VOICEMAIL #
800-222-311
-
SAVE
BACKSP