27
ASSIGNING 5200 CONTROLLER ACTIONS
While editing, THE400 Mini positions a light blue indicator over the THECXSTICK button currently being assigned. For this
button:
• To change the assigned action, use
a
to select the 5200 controller action or button you want to assign and press
F
• To keep the assigned action, press
R
• To clear the assigned action and leave it unassigned, press
L
• To make a selection from a dierent action group, press
D
Once an assignment is made, cleared or skipped, THE400 Mini will move the blue indicator to the next button, where you
repeat the process until all buttons have been assigned, cleared, or skipped.
To Next Page
Loading...
