ATEQ F5200 User Manual

Quick start manual - F5200
MR-F5200B-U Quick start manual ATEQ F5200 Page 10/17
3. TEST TYPE
Test type selection: four tests types are available:
¾ Leak test (LEAK),
¾ Pressure (BLOCKAGE),
¾ Desensitized test (DESENTIZED),
¾ Operator test (OPERATOR).
4. PROGRAMS MANAGEMENT
4.1. LEAK TEST PROGRAM CREATION
In the test menu, press the PARAM key.
Select the program number to create.
Then select the LEAK test type.
The parameters menu is displayed, access at each
parameter by pressing the corresponding key and by
using the numerical keyboard, enter the values and
validated by ENTER. Press the "RETURN" key to back
to the test menu.
4.2. CURRENT PROGRAM SELECTION
From the test menu, press the PROG key.
The programs list is displayed; the current program
appears in yellow key.
Select the new current program by pressing the
corresponding key, the color changes and becomes
yellow. Press the "RETURN" key to back to the test
menu.

ATEQ F5200 Specifications

General

Brand	ATEQ
Model	F5200
Category	Test Equipment
Language	English