ATEQ F5200 User Manual

Quick start manual - F5200
MR-F5200B-U Quick start manual ATEQ F5200 Page 13/17
CONFIGURATION MENU
See the manuals CDROM for further information.
1. EXTENDED MENUS
The extended menu gives access to additional functions.
If these functions are activated in the extended menus, they will be found in the
FUNCTION menu when the program ist created. If no additional function is activated, the
FUNCTION menu is empty.
1.1. ACTIVATION AND ADJUSTEMENT OF THE ADDITIONAL FUNCTIONS
Activate the functions in the test parameters "Functions" menu of each program.
1.2. ADDITIONAL FUNCTION LIST
¾ Name
¾ Program sequence
¾ Units
¾ Filter
¾ Automatic Connector
¾ Calibration check by volume
¾ Transient Attenuation (ATR)
¾ Pre Fill Type
¾ Fill Type
¾ Permanent Blowing
¾ Valves Codes
¾ Auxiliaries Outputs 24 V DC
¾ End Of Cycle
¾ Mini-Valve
¾ Rework Limit
¾ Sealed Components
¾ Peak Hold
¾ Reference Volume
¾ Volume Compute
¾ Stamp Function
¾ Temperature 1 Correction
¾ Indirect or recovery measure
¾ Sign
¾ Automatic Save
¾ Electronic Regulator
¾ Regulator Control
¾ Piezo Auto zero
¾ Hour
¾ RS232
¾ RS485
¾ Modbus
¾ Security
¾ Backlight
¾ External dump Option
¾ I/O Configuration
¾ Remote control (RC5)
¾ Auto parameter
¾ N tests
¾ Flow Level
¾ No Negative
¾ Absolute
¾ Display Mode
¾ Countdown

ATEQ F5200 Specifications

General

Brand	ATEQ
Model	F5200
Category	Test Equipment
Language	English