28 1800296 C
Preventative Maintenance (perform after every use)
In order to keep the unit operating satisfactorily, perform the
following procedure after every use.
1. Clean and wipe off the outside of the unit of any residual liquid
aerosol reagent with a non-flammable cleaning agent.
2. Check the unit for liquid aerosol reagent leakages. Tighten
the drain plug if necessary.
3. Check the output nozzle for blockage or deposits.
4. Check the output collar for looseness. Tighten any loose
fasteners as necessary.
5. Check for looseness of fasteners around the unit. Tighten any
loose fasteners as necessary.
6. If the generator is to be stored for an extended time, repeat
the Pre-Use Check-Out Procedure in Section 5 before storing.
To Next Page
Loading...