Thermal Generator - 5C A-1
APPENDIX A
Specifications
Physical Characteristics
Dimension (L x W x H) 15 in. (38.1 cm) x 10 in. (25.4 cm) x 9 in. (22.9 cm)
Weight 23 Lbs. (10.5 kg.) empty
40 Lbs. (17 kg) full of liquid aerosol reagent
Operational Requirements
Power 115 VAC, 60 Hz, 5.5 Amps (for Part Number 9300207
and 9300213)
230 VAC, 50 Hz, 2.5 Amps (for Part Number 9300208
and 9300214)
Electrical Fuses For 115V, Two Required, 5 x 20 mm, 8A, 250V,
FAST BLO
For 230V, Two Required, 5 x 20 mm, 4A, 250V,
FAST BLO
Aerosol Reagent PAO-4, DOS, Ondine EL, or Mineral Oil for Part
Number 9300207 and 9300208
DOP for Part Number 9300213 and 9300214
Liquid Aerosol Reagent
Capacity
64 fluid ounces (1.9 Liters) of reservoir capacity
Compressed Inert Gas
Input
50 psi ± 5.0 psi (3.45 Bar ± 0.35 Bar)
Compressed Inert Gas
Consumption Rate
0.45 Cubic Feet per Minute (13 Liters per Minute)
Duct system requirement Negative pressure required. Positive duct pressure
requires auxiliary injection device having a higher
pressure.
Display Operating
Temperature
407º C ± 8º C
Duty Cycle Intermittent on/off or
Less than 4 hours on and
More than 1 hour off
To Next Page
Loading...
Need help?
General