5 1800296 C
Intended Use
This product is intended to be used to introduce aerosol when leak
testing in-place, high efficiency filters. It is to be used when
introducing aerosol into ambient or below ambient pressure systems.
This product is not intended for use in freezing, wet, or intense
sunlight conditions.
Any other use of this product may impair the generator’s protective
devices and is the user’s responsibility and at the user’s risk.
User Responsibility
The user must:
1. read and comprehend the information contained in this manual
before using the product;
2. have an understanding of the electrical and mechanical system
principles used in the operation of this generator;
3. be trained in the use of high pressure gas equipment;
4. properly use this product for the intended purpose and follow all
regulations and procedures that apply to the location where this
product is used;
5. maintain the product as specified in this manual;
6. maintain and keep in proper working condition any other
equipment associated with the operation of this product;
7. insure there is adequate pressure and flow of insert gas supply to
the product;
8. verify the type and quality of liquid aerosol reagent to be used
with this product.
To Next Page
Loading...
Need help?
General