- 17 -
2.3.7 Filler caps
The fuel filler cap and oil filler cap are located inside
the unit. They are easily accessible by opening the
front door.
2.3.8 Spillage free frame
A spillage free frame with forklift slots allows the
customer to transport the light tower easily with a
forklift. It avoids accidental spilling of engine fluids
and thus helps to protect the environment.
The leaking fluid can be removed via a drain hole,
secured by a drain plug. Tighten the plug firmly and
check for leakages. When removing the leaking fluid,
observe all relevant local legislation.
2.3.9 Mast and floodlights
The 100% galvanized hydraulic light tower mast
consists of 6 mast sections and can be extended up to
8 metres in 25 sec. It is operated by up and down
buttons. The mast can be rotated through 340°.
The HiLight H5+ provides 4 LEDs of 350 Watt with
a maximum lighting capacity of 154.000 lumen. The
HiLight H2 provides 4 metal halide floodlights of
400 Watt with a maximum lighting capacity of
144.000 lumen. Each lamp can be separately
positioned and inclined.
2.3.10 Undercarriage, road lights and
reflectors
There are 2 variants of undercarriage available for
HiLight H5+/H2 light towers:
– homologated for road use, fixed tow bar
(standard)
– not homologated for road use (max. towing speed:
20 km/h) (option)
The homologated light tower undercarriages are
manufactured according to ISO/European road
standards currently applicable.
The undercarriage is equipped with a fixed tow bar
and several towing eyes are available.
For more details on the available undercarriages, their
main features and available towing eyes, see
“Undercarriage” on page 65.
Road lights and reflectors are standard on the road
homologated version.
00_00_HiLight H5+-H2_EN.book Page 17 Thursday, February 27, 2020 3:23 PM
To Next Page
Loading...
