Atlas Copco HiLight V2+ User Manual

- 28 -
MAINTENANCE SCHEDULE - P2000I
Note:
(1) Initial replacement of the engine oil is after before one month or after 20 hours of operation.
(2) The air filter needs to be cleaned more frequently when using in unusually wet or dusty areas.
* Since these items requir
e tools, date and technical
skills, you should find a local delaer perform the
service.
Maintenance Item Schedule
(running hrs)
Routine Pre-operation
check (daily)
6 months or
100 hrs
12 months or
300 hrs
Spark plug Check condition.
Clean and replace if necessary.
X
Fuel Check fuel level and leakage. X
Fuel hose Check fuel hose for cracks or damage, Replace if necessary X
Oil Check oil level in engine. X
Replace X (1)
Air filter Check condition.
Clean
X (2)
Muffler screen Check condition.
Clean and replace if necessary.
X
Spark arrester Check condition.
Clean and replace if necessary.
X
Fuel filter Clean and replace if necessary. X
Crankcase breather hose Check hose weather for cracks or damage.
Replace if necessary.
X
Cylinder head Decarbonizes cylinder head More frequently if necessary *
Valve clearance Check and adjust when engine is cold. *
Fittings / fasteners Check all fittings and fasteners.
Correct if necessary.
*
The point where abnormality was recognized by use. X

Atlas Copco HiLight V2+ Specifications

General

Brand	Atlas Copco
Model	HiLight V2+
Category	Lighting Equipment
Language	English