♦
Check the engine oil level on the dipstick.
♦
Fill the fuel tank with fuel.
♦
Check that all the controls are working.
♦
Make sure that there is no oil leakage, and that
all bolted joints are tightened.
♦
After the engine is started, leave the speed control
in the idling position for a few minutes to warm up
the engine without loading it.
Starting the engine, Honda
1. Open the fuel cock (A).
2. Set the throttle control (B) to
1
⁄
2
throttle.
3. Close the choke valve (C) if the engine is cold.
If the engine is warm or the ambient temperature
is high, close the choke valve halfway or leave
it open.
17© 2015 Construction Tools EOOD | No. 9800 1117 01c | 2015-05-20
Original instructions
Safety and operating instructionsLF 50
To Next Page
Loading...
