♦
Clean and check fuel filter and fuel tank. See
engine manual for more information.
♦
Replace air filter.
♦
Clean the engine's cooling flanges. See engine
manual for more information.
♦
Change oil in the engine. See engine manual for
more information.
♦
Clean and adjust the carburettor. See engine
manual for more information.
Cleaning the fuel tank
♦
Inspect and clean the fuel tank (A).
Inspection and adjustment of engine
1. Clean and adjust the carburettor (A).
2. Clean engine cooling flanges (B).
3. Adjust the engine's valve (C) clearance.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in accordance with local restrictions.
Before a fuel driven machine is deposited it must be
emptied and cleaned of all oil and fuel. Remaining
oil and fuel must be dealt with in a way that does not
adversely affect the environment.
Always send used filters, drained oil and fuel
remnants to environmentally correct disposal.
Storage
♦
Empty the tank before storing the machine.
♦
Clean the machine.
♦
Clean the air filter.
♦
Carefully pull the start handle until a slight
resistance appears.
♦
Wipe off any oil and dust that has accumulated
on the rubber parts.
♦
Cover the machine and store it in a dry, dust-free
area.
23© 2015 Construction Tools EOOD | No. 9800 1117 01c | 2015-05-20
Original instructions
Safety and operating instructionsLF 50
To Next Page
Loading...
