Checking the engine, Honda
♦
Check the oil level on the dipstick.
♦
Check the fuel level (A).
♦
Check the engine for oil leaks.
♦
Clean and replace the air filter (B) if necessary.
After 20 hours of operation
Maintenance routines:
♦
Change engine oil.
♦
Clean and refit air filter.
♦
Check the engine speed.
Changing the engine oil, Honda
1. Unscrew the drainage plug (A).
2. Tilt the machine backwards and let the oil drain
in a drainage hose.
3. Clean around the hole (B) where the drainage
plug (A) was placed.
4. Refit the drainage plug (A).
5. Unscrew the dipstick (D).
6. Fill with oil (C).
7. Refit the dipstick (D).
8. Start the engine and allow the engine to idle a
few minutes before increasing to full power.
Every 100 hours of operation
(weekly)
Maintenance routines:
♦
Check the shock absorbers.
♦
Check the engine speed.
♦
Check that the V-belt is not damaged.
♦
Change engine oil. See engine manual for more
information.
♦
Check and clean the spark plug. See engine
manual for more information.
♦
Clean the carburettor's fuel cock. See engine
manual for more information.
♦
Clean the silencer's spark arrestor. See engine
manual for more information.
21© 2015 Construction Tools EOOD | No. 9800 1117 01c | 2015-05-20
Original instructions
Safety and operating instructionsLF 50
To Next Page
Loading...
