Technical data
Machine data
Honda LLF 50
Engine
Honda GX 100, 4-stroke, manual start.Manufacture/Model
2.2 (3)Power, kW (hp)
3,600Rated speed, r.p.m.
1,600Idling, r.p.m.
Compaction data
95 (5700)Vibration frequency, Hz (r.p.m.)
0.91 (0.04)Amplitude, mm (in.)
8.4 (1888)Centrifugal force, kN (lbf)
Performance
24 (78.7)Operating speed, m/min (feet/min)
20° (30%)Max tilt,° (%)
Fluid volumes
1.2 (1.26)Fuel tank capacity, litres (qts)
0.4 (0.42)Crank case, litres (qts)
0.67 (0.71)Fuel consumption, litres/hour (qts/h)
Lubricants
Petrol (gasoline). Use unleaded petrol of standard quality.Fuel type
Shell Rimula R4 L 15W-40Engine oil
Weights
Honda LLF 50
52 (114.6)Net weight, kg (lbs)
52.5 (115.7)Operating weight EN500, kg (lbs)
Weights for options
Honda LLF 50
3.5 (7.7)Transport wheel, kg (lbs)
1.1 (2.4)Low vibration handle, kg (lbs)
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11201, EN 500-4.
Vibration value determined according to EN 500-4. See table ”Noise and vibration data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
© 2015 Construction Tools EOOD | No. 9800 1117 01c | 2015-05-20
Original instructions
24
LF 50Safety and operating instructions
To Next Page
Loading...
