Product information EN Power Focus 4000
4
© Atlas Copco Industrial Technique AB - 9839 001800 00
For further information contact your Atlas Copco sales representative or e-mail
us at:
servaid.support@se.atlascopco.com
Overview
Applications
This Power Focus is a control and monitoring unit for electric assembly tools.
Main components and functions
The ready-to-run fastening system consists of:
• a Power Focus controller. Two different hardware versions are available, the
Graph and the Compact. The user interface and the dimensions are the main
differences between them.
• an RBU, Rapid Backup Unit, enabling the corresponding level of function-
ality (Bronze, Silver, Gold, X, DS)
• a tool cable, available in different models and lengths
• and a tool. The Tensor S/ST/SL tool is available in different configurations
and torque ranges.
Power Focus 4000 - Compact and Graph
Controller Weight
Compact 12 kg
Graph 12 kg
Power
Power Focus operates on a single-phase 110 or 230 VAC line voltage.
Power Focus has a function for sensing the line voltage automatically. This
means that the Power Focus automatically switches to the voltage you connect
to.
Line voltage
90-120 VAC
180-240 VAC
Frequency
50-60 Hz
Ambient temperature
5-40 °C (41-104 °F)
Normal environmental conditions
This standard applies to equipment designed to be safe at least under the fol-
lowing conditions:
• Indoor use
• Altitude up to 2 000 m
To Next Page
Loading...
