Auto select is not allowed for free order Jobs, with two or more Psets/Multistages selected
from the same Power Focus.
The batch size defined in Job overrides the batch size defined for a specific Pset/Multistage
(see parameters P150 Batch count and M202 Batch count. It is not recommended to use the
batch count function in Job and Pset/Multistage settings simultaneously.
Continue and make settings for the options in Configuration, Batch,
Timers, Line control, Result and View. See parameter list section Job for a
description of the parameters.
J330 Use line control must be set to Yes before the digital inputs and relay
settings for line control can be activated.
To Next Page
Loading...
