Atlas Copco Power Focus 4000

Tool
9836 3123 01 145 (428)
11.2 Tool configuration
In the PF Map Tool branch, double-click on
Configuration.
The following submenus are available:
11.2.1 Tool start and Accessory bus
Make settings for Tool
start and Accessory
bus.
The main purpose of
T200 Tool start select
source option “Safety
trigger” is to ensure
that both hands are
placed on the tool
while it is running, and
that the tool stops as
soon as one hand is
released.
The safety trigger is suitable for applications where a high level of safety is desired.
The safety trigger function requires the start trigger and safety trigger buttons to be pushed
simultaneously in order to start the tool. The second button must be pushed within 0.5 seconds from
pushing the first button, the order is arbitrary. If the safety trigger button or the start trigger is released