Atlas Copco Power Focus 600 - PIN Settings; Turn On or Off the PIN; Accessing the Controller When Locked by PIN; Required Hardware

EN Power Focus 600
12
© Atlas Copco Industrial Technique AB - 9836 4954 01
{ , : profile2 in element [table]}
Parameter Description Default value
Trace Enables viewing the trace result as
a graph.
Off: No trace is made and results
are shown as numbers.
Trigger pressed: The trace is
drawn from when the tool trigger is
pressed.
Rundown complete: The trace is
drawn from when Rundown com-
plete is reached.
Off
PIN settings
Using a PIN prevents unauthorized usage of the controller or changes being
made by accident. When PIN is activated the user is prompted to enter the PIN
when accessing the controller.
Turn on or off the PIN
The PIN must be a four-digit number in the range 0000–9999. When enabled
the controller locks automatically after 20 seconds or when pressing the Lock
button.
Accessing the controller when locked by PIN
The controller can be accessed via the web browser on a PC connected to the
controller using the Service Ethernet port or the Factory Ethernet port. See Ac-
cessing controller from a connected PC [Page000].
Required hardware
{ , : profile4 in element [iosection]}
Nödvändiga delar för att kunna sätta upp systemet.
Connecting accessories
{ , : profile4 in element [iosection]}
How to setup the system with accessories (Stacklight, etc.).