- 32 -
Oil pressure display
This view shows the Oil pressure and the running
hours.
See also “Parameter list” on page 32 for selection
between bar and psi.
Fuel level display
This view shows the Fuel level and the running hours.
Voltage - frequency - running hours display
This view shows the voltage, frequency and running
hours.
Engine speed display
This view shows the engine speed and running hours.
4.2.4.4 Parameter list
The Parameter Menu's are pre-programmed!
A password will be asked for when an attempt to
change a setting is about to be done (user password =
2003).
Menu's shown on the Parameter list LCD:
– Running hours adjust
This menu is used to adjust the amount of running
hours. The running hours can only be highered,
not lowered.
–Unit Type
– Service Timer 2 reset
– Service Timer 1 reset
These menus are used to reset the service timers.
When a service timer alarm occurs and is
acknowledged, the service timer will be reset
automatically.
Unit type 2 for QAS 500 Volvo!
To Next Page
Loading...
