- 96 -
9.3.6 COSMOS™
COSMOS™ is a web-based global remote
monitoring system that electronically tracks every
aspect of equipment from its location to its operating
parameters. The Cosmos system can send e-mails or
SMS messages to the contractor or owner in real time,
with all critical and non-critical events and data
involving your compressors and generators. It allows
optimal servicing.
If no LEDs light up when the generator is running, the
Cosmos module has not been installed correctly.
Consult the Cosmos manual for a descprition of LED
indications.
For information about COSMOS™, consult your
local Atlas Copco dealer.
9.3.7 COC box
When operating the Qc2002™ control panel in AMF
mode, the installation of a COC box is required.
PC .......Plant contactor (generator contactor)
MC ......Mains contactor
X25 .....Customer wiring
To connect the COC box to the generator
equipped with Qc2002™ controller 8
connections have to be made on X25.
Connect 1 to 1, 2 to 2,... 8 to 8.
The COC box (Change over
contactor) is only available in
combination with the Qc2002™
control panel.
To Next Page
Loading...
