Page 8
Unity Controller R9 Variants, Issue 13
3 Introduction
3. 1 Scope
This manual will guide the user during set-up, operation and maintenance of the Henrob Self
Pierce Riveting (SPR) equipment. An overview of assembly component parts is provided. System
requirements are detailed in this manual as well as instructions which reference safety and
installation factors of the equipment functionality.
Application of the equipment provided, including the accessories and documentation, is restricted
to use by duly authorised personnel.
All reassembly tasks shall be conducted with due reference to the appropriate manufacturing
and assembly drawings, paying particular heed to fastener torque values and the application of
consumables such as lubricants, sealants and thread-locking compounds.
The illustrations and procedures contained within this document are correct at the date of issue.
3. 2 Intended Use of the Equipment
Atlas Copco IAS warrants the supplied equipment to be correct and t for purpose as described,
declared and agreed in the quotation/sales order or supervening contract.
Atlas Copco IAS accepts no liability for damages arising in whole or in part from:
Non-observance of the supplied instructions.
Any use outside of the declared operating envelope.
Use for a purpose other than the original design intent.
Connection to electrical and pneumatic supplies which do not conform to the
specied ratings of the equipment.
Undeclared use in adverse environmental conditions.
Lack of due care and/or maintenance of the equipment.
Damage arising from external inuences, such as re, ood etc.
Use by unauthorised or untrained personnel.
Arbitrary dismantling and reassembly or unauthorised technical modications.
Use of incorrect rivets or unlicensed replacement parts.
Use of incorrect or unlicensed software.
To Next Page
Loading...
Need help?
General
