*Subject to change without notice Atomos Shogun – User Manual Edition 2: January 2016 11
5. Shogun Connections
1. Power Button
The power button as described earlier controls the simultaneous turning
on or off both recorder channels.
2. Calibration Port
The Calibration 2.5mm jack port beneath the power button allows for
connection of the optional Atomos Spyder unit. This single port is able
to be used to calibrate both devices and each channel will display as a
separate option in the Atomos Calibration software, an updated release of
this software will be available via http://www.Atomos.com/support
3. Headphone Ports
Both channels have an independent 3.5mm headphone jacks for
monitoring audio. The volume control is operated via the touch screen
interface.
12
3
To Next Page
Loading...
