© 2008 • All rights reserved. 21
DLA2/4/6 Speaker Level Audio Router
Room Volume Adjustment
Press the 1. Room 1 Selector Button - the Room 1 Indicator LED will light up RED
(indicating that Room 1 is selected for adjustment).
ROOM 1
ROOM 2
Press
2. Press VOL - or VOL + until the desired volume is obtained.
ROOM 1
ROOM 2
Press
OR
3. Press the Room 2 Selector Button - the Room 2 Indicator LED will light up RED
(indicating that Room 2 is selected for adjustment), while the Room 1 Indicator
LED will light up BLUE (indicating that Room 1 is ON).
ROOM 1
ROOM 2
Press
4. Press VOL - or VOL+ until the desired volume is obtained.
ROOM 1
ROOM 2
Press
OR
5. Continue this process for each additional Room.
To Next Page
Loading...
