ATV 250 - (II) Checking Steps

9.Take off rear bush ¢Ù
10.Take off driving axle clamp assy(front)¢Ù,
rear arm nut (right side)and rear arm joint bolt.
11.Take off rear wheel fork assy ¢Ù.
(II)Checking steps
1.Check
a:If rear shock absorber is leakage, if any ,
replace it.
b:If rear shock absorber is bent or damaged, if
any, replace it.
c:Pull the spring up and down to check if the
spring fatiguer or damaged,if any, replace rear
shock absorber.
-109-