ATV 250 - (IV) Front Fender

(IV)Front fender
1.Disassembly:
(1)Place the vehicle on the horizontal ground.
(2)Disassemble the front luggage carrier ¢Ù.
(3)Disassemble the front guarding plate¢Ú.
(4)Cut off the connecting wire¢Ùof headlight.
(from connecting point)
(5)Disassemble the bumper ¢Ú.
(6)Disassemble the front fender ¢Ù.
¢Ú
-37-