ATV MS-8 - HDMI Color

25
Multiformat switcher MS-8 Reference Manual
Output MENU
Output MENU 1/4
Parameter name Range Unit Remarks
Format
2K/59p/50p/29p/25p/24p/23p,1080/59p/50
p/29p/25p/24p/23p,
1080/59i
/50i,720/
59p/50p,480/59p,576/50p,480/59i,576/50i
Sets the output format.
SDI Settings
RESET
SDI output settings.
Press reset to restore the initial values.
SDI OSD Off,
On
When on, displays the onscreen menu in SDI output.
SDI Color
YCC422
,RGB444,YCC444,
Sets SDI output color sampling.
YCC422: 10-bit YCC 4:2:2 output.
RGB444: 10-bit RGB 4:4:4 output.
YCC444: 10-bit YCC 4:4:4 output
* When set to RGB444 or YCC444, 2K 1080p output is 6G-SDI,
and 1080i 720p output is 3G-SDI. 480i and 576i are always 10-bit
YCC4:2:2 output.
3G SDI Type LevelA,
LevelB
Sets the output method for 3G-SDI output.
Level-A: Commonly used in facility equipment
Level-B: Commonly used in broadcast equipment.
HDMI Settings
RESET
HDMI output settings
Press reset to restore the initial values.
HDMI OSD Off,
On
When on, displays the onscreen menu in HDMI output.
HDMI Mode
Auto
,HDMI,DVI(No Audio)
Sets whether the HDMI output is in DVI mode or not.
When in AUTO the optimal mode for the connected device will be used.
HDMI Color
Auto
,RGB(Full),RGB(Limit),YCC444,Y
CC422
Sets HDMI output color sampling.
Auto: Color sampling optimal for the connected device.
RGB (Full): RGB 4:4:4 output.
Black (0%) to white (100%) output from 0–255 (1023).
RGB (Limit): RGB 4:4:4 output.
Black (0%) to white (100%) output from 16 (64) - 235 (940).
YCC444: YCC 4:4:4 output
YCC422: 10-bit YCC 4:2:2 output
HDMI Color Depth
Auto
,8bit,10bit
Sets HDMI output color depth.
Auto: Color depth optimal for the connected device.
8bit: 8-bit color depth for each color.
If HDMI Color=YCC4:2:2, output is always 10-bit.
10-bit: 10-bit color depth for each color.
Used for HDMI 1.3 and higher, with devices supporting deep color.