ATV MS-8 - Installation

6
Multiformat switcher MS-8 Reference Manual
Installation
Refer to the parameter list for information on setting content and items.
Windows
1
Download the USB remote application for Windows from our website.
http://www.atvcorporation.com/en/products/videos/MS-8/support.html
2
Unpack the downloaded ZIP file to any directory.
Move the unpacked file to the desired directory.
3
Run MS-USB-RS.exe.
USB remote program will run.
(The "exe" extension may not display on your machine.)
Depending on how your computer is set up, the first time you launch MS-USB-RS it may be terminated with an error
message saying the PC is protected by Windows. In this case, select the le and right-click to select "Run."
Caution
Mac
1
Download the USB remote application for Mac OS X from our website.
http://www.atvcorporation.com/en/products/videos/MS-8/support.html
2
Unpack the downloaded DMG file to any directory.
Move the unpacked file to the desired directory.
3
Run MS-USB-RS.app.
USB remote program will run.
(The "app" extension may not display on your machine.)
Depending on how your Mac is set up, the rst time you launch MS-USB-RS it may be terminated with an error message
reading "MS-USB-RS" can't be opened because it is from an unidentied developer." In this case, depress the "control" key
and click "Open." The system will ask for your verication to run the program.
This procedure is only needed the rst time you run the program.
Caution
Refer to P.13 Parameter list