53
1．Safety rules:
Warning: This machine is connected to power. Unsafe
procedures and operations may cause personal injury or death!
All users, operators and support personnel of this equipment must read and
understand these safety rules.
1.1 To prevent electric shock:
Contact with live parts will cause serious injury and fatal blow.
1. Do not touch live parts;
2. Do not work in a humid environment;
3. Put on dry insulating gloves and work protective clothing.
4. Cut off all power supplies before installing or repairing this equipment.
5. Turn off the power when not in use.
6. Install and ground the welding power supply according to the instructions in
the user manual;
7. Do not use worn-out cables and connectors that are too small or have poor
contact;
8. Do not wrap cables around your body;
9. Do not touch the welding gun electrode and grounded objects and circuits at
the same time.
10. Use well-maintained equipment and promptly repair and replace broken
equipment.
To Next Page
Loading...