Ideal for:
• Radiant
or
convection electrical heating system
• Circulator control
in
a hot
water
system
• Electrical hot
air
furnace
• Hot
air,
gas
or
fuel
conventional furnace
• Air-conditioning system
Not recommended
for:
•
Gas
or
fuel
furnace
or
boiler
with
wall
chimney,
if
they include a combustion gas
purging cycle exceeding
30
seconds.
To
verify this point, check
the
duration of the
delay between
the
heating command sent
by
the
thermostat
and
the
moment
when
the
burner actually goes
on.
• Multi-zone systems, where
several
thermostats command a single heating
or
air-
conditioning
unit.
In the last two cases, the conventional mode
is
recommended.
8
To Next Page
Loading...
