Aube Technologies TH141A-HC-28 - Operating of the Telephone Interface

6.3 OPERATING THE TELEPHONE INTERFACE
You can activate the Vacation setting using the Vacation button of the telephone
controller
or using the telephone itself.
1 - To activate the Vacation setting, press the Vacation button of the CT240. The
Vacation setting will be displayed during 5 seconds and the 11II icon will flash
on the screen. You no longer have access to the TH 141 keypad if this function is
activated by the telephone controller.
2 - To deactivate the function and return to the previous mode, press the Vacation
button
of the telephone controller again. The red light will go off and the III
icon will disappear within a maximum of 5 seconds.
To modify the Vacation setting, refer to section 2.2.
23