• The assembly tool must engage in the semi-circular recess
and in the hole (-arrow A- and -arrow B-).
Note
There is only one inspection hole -arrow B- at the periphery; turn
the flywheel accordingly.
– Insert transportation lock - T40170- into gearbox housing from
below and clamp onto flange shaft -1-.
– Check whether aluminium bolts securing engine to gearbox
can be reused; if so, apply marking ⇒ page 71 .
Vehicles with sealing element:
– Clean contact surface -1- on timing chain cover (bottom) and
sealing element -2- with cleaning solution - D 009 401 04- .
– Bond sealing element to timing chain cover (bottom).
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
64 Rep. gr.34 - Controls, housing
To Next Page
Loading...
