Audio Technica AT-LP60XBT User Manual

4. Attach the platter.
Align one of the openings with the position of the motor pulley (brass-colored).
5. Place the belt on the motor pulley (brass-colored).
Grasp the belt that was attached in step 3 and, while pulling it, place it on the brass motor pulley.
6. Using your hands, rotate the platter ten times.
Slowly rotate the turntable ten times by hand in the direction of the arrow.
When the turntable is moved
Using the product’s original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If
you do not have the packaging materials, take the following measures:
After disconnecting the AC adapter from the outlet, remove the felt mat and platter, and then wrap them so that
they do not get damaged.
Attach the protector to the cartridge.
Use a string or something similar to tie the tonearm to the rest so that it does not move.
Wrap the turntable body with paper or a soft cloth so that it does not get damaged.
Troubleshooting

Audio Technica AT-LP60XBT Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC servo motor
Drive system	V-belt
Output level	150 mV
Product color	Black
Wow & flutter	0.25 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Aluminum
Built-in phono preamplifier	Yes
Signal-to-Noise Ratio (SNR)	50 dB
Power supply type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	115/230 V
Quantity	1
Cables included	Audio (3.5mm)
USB ports quantity	0

Weight and Dimensions

Depth	373.3 mm
Width	359.5 mm
Height	97.5 mm
Weight	2600 g