interference which may cause undesired operation. Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication. This equipment should be installed and operated with minimum distance 20 cm between the radiator
& your body.
Notes on use
Turntable body
Do not set and use the product in locations that are considerably hot or humid, dirty, or subject to extreme
vibrations.
The product should be positioned on a flat, level surface.
When closing the dust cover, close it completely. Do not open the dust cover during playback.
Read the user manual for the Bluetooth receiver device.
Cartridge
Attach the provided protector to the cartridge when the product is not in use.
Do not touch the stylus of the cartridge with your finger.
Do not allow the stylus to bump against the platter, felt mat, or edge of the record.
Part names and functions
1. 45 RPM adapter (shown in receptacle)
Adapts 7″ records with large center holes to fit center spindle.
2. Platter
3. Spindle
4. Felt mat
To Next Page
Loading...
Need help?
General
Weight and Dimensions
