Audio Technica AT-LP60XBT User Manual

This product is not intended for DJs. Do not touch the record or the platter while the record is playing.
How to use with Bluetooth connection
To connect for the first time, pair the product and your device via Bluetooth wireless technology.
Read the user manual for the Bluetooth receiver device.
Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or
applications via Bluetooth devices.
1. Turn on the Bluetooth receiver device.
Indicator LED turns blue when the product and Bluetooth receiver device are connected correctly.
When the indicator LED lights in red, press the wireless function button to connect Bluetooth
communication.
2. Refer to “Automatic operation” on p. 8 or “Manual operation” on p. 8 to play a record.
When Bluetooth is connected, and you keep the wired connection (amplifier, speaker, etc.) turned on, the sound
will be heard from both the wireless and wired devices. Turn on only the device you want to use for playback.
Care
Turntable body
When the turntable body is dirty or dusty, first disconnect the AC adapter, and then wipe off the dirt and dust
with a soft, dry cloth.
Do not use benzenes, thinners, etc.
When storing the product for a long time, disconnect the AC adapter from the outlet and wrap the product in
plastic; do not allow it to become damp.
Stylus tip
If dirt and grime are stuck to the stylus tip, clean it with a commercially sold brush.
We recommend using a stylus cleaner (sold separately) if the stylus tip is considerably dirty. Clean the stylus tip
by moving the brush from the rear to the front of the stylus tip.
Replacing the stylus
Removing the stylus
In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip
wears down.
As a rule of thumb, replace the stylus after 400 hours of use.
Be sure to disconnect the product’s AC adapter from the outlet.
When replacing the stylus, hold the headshell and the cartridge body tightly.
1. Rotate the front of the stylus in a forward and down motion.
Removing the stylus

Audio Technica AT-LP60XBT Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC servo motor
Drive system	V-belt
Output level	150 mV
Product color	Black
Wow & flutter	0.25 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Aluminum
Built-in phono preamplifier	Yes
Signal-to-Noise Ratio (SNR)	50 dB
Power supply type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	115/230 V
Quantity	1
Cables included	Audio (3.5mm)
USB ports quantity	0

Weight and Dimensions

Depth	373.3 mm
Width	359.5 mm
Height	97.5 mm
Weight	2600 g