3. Press the tonearm lift button.
When you press the tonearm lift button, the tonearm descends slowly onto the record and play begins.
Pausing the record
1. After lowering the volume of the amplifier, speakers, etc. sufficiently, press the tonearm lift button to lift
the tonearm.
Stopping the record
Once the record has played to the end, the tonearm will automatically return to the tonearm rest.
To manually stop the record, do the following.
1. Lower the volume of the amplifier, speakers, etc. sufficiently.
2. Press the STOP button.
Once the record stops playing, the tonearm automatically returns to the tonearm rest.
3. Remove the record after the platter has come to a complete stop.
When the tonearm reaches the end (center) of the record, it will automatically lift and return to the tonearm rest.
Do not interfere with its motion. Doing so can cause the product to malfunction. If the tonearm does not lift and
return to the tonearm rest, press the STOP button to complete this operation.
If the felt mat gets dirty, it can easily scratch the record, so remove the felt mat periodically and wipe off any
dust.
To prevent the record from scratches and warping, remove it after use.
Do not use a disk stabilizer.
Do not use a platter other than the one provided.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
