slowly turn it counterclockwise (to the left until it clicks on).
Setting up the turntable
Position the product on a level surface.
To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as
speakers.
The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from
radios.
If the product is near equipment (cell phone, etc.) that emits strong radio waves, noise may occur.
Preparation for use
Tonearm balance and tracking force In order for the cartridge to reproduce audio correctly from the record’s
grooves, the tonearm’s balance and tracking force must be adjusted to fit the specifications of the cartridge. If the
tonearm’s balance and tracking force are not properly adjusted, the record or the cartridge’s stylus may become
damaged.
Do not drag the cartridge’s stylus across the record or turntable mat when adjusting the tonearm’s balance or
tracking force. Doing so may damage the stylus.
Setting tonearm balance
1. Remove the cartridge’s protector.
2. Unlock the tonearm and lift the tonearm lift control lever.
The tonearm is tilted because the balance has yet to be adjusted.
To Next Page
Loading...
Need help?
General
