400HD Series IP Phones for Teams
Version 2.3.410 102 Document #: LTRT-08641
Features related to the AudioCodes Device
AudioCodes’ Device Manager features new capabilities for the Teams phones:
• Connected peripheral devices are displayed in a dedicated
new Show Info screen. Network administrators can navigate
to the screen via the Show Info menu option (Monitor >
Dashboard > Devices Status and then click the button
next to the device).
The Show Info screen displays all information related to the device needed by the
network administrator. The Peripherals tab is displayed (by default) if a peripheral
such as a headset is connected, as shown in the previous figure. All information that
the peripheral device sends to the OVOC as raw data composes the Peripherals
screen.
Network administrators can also view information under the tabs Summary, Network
Info, Version Info, Alarms, Actions List and Advanced.
For the feature to function, network administrators must make sure that the parameter
‘dm/report_status/paths’ exists in the device’s template in the Device Manager (it’s
part of the default template); the value that must be configured for this parameter
needs to be status/audio/stream/*, status/network/wifi/mac, status/installed/*,
status/peripheral/device/*
• Valid values are:
status/audio/stream/*
status/network/wifi/mac
status/installed/*
status/peripheral/device/*
• Information related to the device’s version is displayed under
the Version Info tab in the Show Info screen. Network
administrators can navigate to it via Monitor > Dashboard >
Devices Status and then clicking next to the
listed device and selecting Show Info).
To Next Page
Loading...
