400HD Series IP Phones for Teams
Version 2.3.410 84 Document #: LTRT-08641
New support in the device’s Configuration File for the 802.1x settings enables
customers to perform pre-staging configuration for 802.1x parameters. Until now, the
802.1x settings were only available via the phone screen.
The 802.1x settings now available in the Configuration File are:
• Enable/Disable
• EAP method
• Identity
• Password IPPAN-5272
Before applying an update, active user interaction is detected and the user is
notified about the impending update.
When any update is pushed to the device, the device’s firmware detects whether the
user is actively using the device. After determining this, an appropriate message and
options are provided for the user to either delay the update or apply it immediately.
Until now, updates have been pushed without any prior notification, thereby forcing
the user to disengage from their ongoing activity on the device, e.g., to disengage
from an ongoing call, causing disruption to communications.
Android security has been hardened by limiting SSH access. With this release,
administrator users who access SSH have reduced file system privileges. For
example, files cannot be deleted, and some parts of the file system cannot be
reviewed. This change was made to prevent malicious actions or unintended errors
that might cause damage to the device.
Disconnecting from Wi-Fi on the C470HD phone is performed silently, without
built-in audial notifications | noisy ‘beep’ distractions.
New capability was added to configure parameters related to audio. The
capability was added in order to support the phone in special environments such as
noisy environments. To use the capability, contact AudioCodes Support.
The Android WebView app has been updated.
3.8.2 Resolved Limitations in Version 1.17.686
3.8.2.1 Teams Application
Here are the Teams application limitations that have been resolved in Version 1.17.686.
Table 3-29: Resolved Teams Application Limitations in Version 1.17.686
Incident Description
IPPAN-5457
[C435HD] Even though a call has already been answered, the phone on some
occasions keeps showing the ‘Incoming call’ screen with the ‘Answer’ softkey.