AudioCodes C470HD - Page 16

400HD Series IP Phones for Teams
Version 2.3.410 16 Document #: LTRT-08641
• When updating non-LCP touch screen phones to version 2.3.410, the parameter
default is COMPLEXITY_HIGH. Password complexity rules are as follows:
Note:
• If a phone was configured with a complex password in earlier versions, it preserves
that password.
• Admin can optionally change it to a non-complex password.
 AudioCodes Android-based phones now support multicast paging (including
barge-in), in compliance with customer requests, especially customers in the
educational market invested in emergency notification systems which use multicast.
The new feature allows a call to be paged to a group of phones to notify a team about
(for example) the time and place at which a meeting will commence. The paging call is
multicast via a designated group IP address, in real time, on all phones in the group.
Barge-in enables paging to interrupt (barge in on) phone conversations that are
in progress. The feature is configured in the phone’s cfg configuration file. Default:
Disabled. When enabled, a paging call overrides an ongoing regular call/meeting due
to emergency. When disabled, those who are in regular calls when a paging call
comes in are prompted in the phone screen to accept or reject the paging call. If it's
accepted, the regular call is put on hold and the paging is heard.
New paging parameters have been added to the cfg configuration file. The values of
these parameters can be changed on the fly. Paging behavior is immediately affected.
/voip/services/group_paging/enabled
/voip/services/group_paging/codec
/voip/services/group_paging/group/*/activated
/voip/services/group_paging/group/*/multicast_addr
/voip/services/group_paging/group/*/port
/voip/services/group_paging/allow_barge_in/enabled
See the User-Administrator Manual for detailed information.
AudioCodes Android-based phones currently support incoming paging calls (listening).
Outgoing paging calls (broadcasting) will be supported in the future.
• When an incoming call is received on a phone that is in idle, the phone
immediately automatically answers it, irrespective of whether barge-in is enabled
or not:
[The screens shown in the figures below are newer than those in the released
version. To view them, contact AudioCodes or wait for the next version release.]