AudioCodes C470HD - Page 21

Release Notes 2. Version 2.3.410
Version 2.3.410 21 400HD Series IP Phones for Teams
 QoS settings for the PC port are now supported (VLAN for PC port).
Admins can configure PC port QoS via the device’s cfg configuration file. The
following three new parameters have been added to the cfg file:
Parameter Description
network/lan/vlan/pc_port_tagging/enable=0 Defines the PC port VLAN as enabled / disabled.
0 = PC port VLAN disabled
1 = PC port VLAN enabled
Default: 0
network/lan/vlan/pc_port_id=0 Defines the PC port VLAN ID.
Range: 0-4096
Default: 0
network/lan/vlan/pc_port_priority=0 Defines PC port VLAN priority.
Range: 0-7
Default: 0
The new feature provides PC port QoS for AudioCodes’ Android-based phones which
now feature settings for VLAN and VLAN Priority (802.1p) for the PC port.
 [Applies to all AudioCodes Android-based phones and MTRAs] A timeout has been
added to the Admin login. The timeout’s value can be configured using a newly
added cfg configuration file parameter:
settings/admin_logout_timeout,values=3
Default value: 3 (minutes)
Valid values: 1-10 (minutes)
Timing begins when exiting the 'Device Settings' menu. When the timeout expires, the
device logs out automatically.
The functionality works for both registered and unregistered devices.
 [C470HD] A ‘Switch to Zoom’ operation can no longer be performed from the phone
UI. Please contact AudioCodes for more information about performing the operation.